Step Action Information
2 Open the trim stop guard. Loosen the 2 orange plastic hand
screws to release the locking plates.
The locking plates can rotate to re-
lease the trim stop guard.
Pull the trim stop guard towards you.
3 Check the trim stop and remove any
pieces of trimmed paper.
4 Close the trim stop guard. Push the trim stop guard into posi-
tion.
Hold the locking plates in position
and tighten the orange hand screws.
5 Attach the trim bin.
Clear paper from the trim stop
130
Chapter 7 - Maintenance
To Next Page
Loading...