Specifications
Operating Conditions
10-35 °C
35-85% relative humidity
Up to 2,000 m above mean sea level
Production
Cycle time: Printer dependent
Interset gap: 1 second (if printer has DFD2, then 1 or 2 seconds,
depending on job settings)
Minimum set time: 4.2 seconds (if printer has DFD2, then 4.5 or 7.8
seconds, depending on job settings)
Maximum set time: 12.5 seconds
Stock Sizes
Minimum input size: 203 mm x 203 mm
Maximum input size: 350 mm x 500 mm
A = Stitch & fold line
B = indicates original lead edge from the printer
Sheet Rotation
Integrated rotator ensures maximum printer productivity.
Maximum rotation sheet size: 320 mm x 227 mm
Minimum rotation sheet size: 210 mm x 203 mm
The cross-track dimension of the sheet (before rotation) must be at
least 7 mm greater than the in-track dimension.
A = Stitch & fold line
B = indicates original lead edge from the printer
Stock Range
80 - 160 g/m² normal paper types
60 - 250 g/m² dependent on paper type and quality
Book Thickness
Maximum finished book thickness: 10.4 mm (208 pages of 80 g/m²;
224 pages of 70 g/m² dependent on paper type and paper quality)
Maximum set thickness: 5.2 mm (52 sheets of 80 g/m²; 56 sheets
of 70 g/m²; dependent on paper type and paper quality)
Stitching
1 - 6 stitches, evenly spaced on the spine of the book
Stitches/spool: up to 291,500
Books*/spool: approximately 127,000
4
Specifications
132
Appendix A - Specifications
To Next Page
Loading...