D Catch tray
Step Action Information
1 Set the catch tray angle according to the
thickness of the book.
For books that are 1.5 mm thick or less,
use position 1.
For books that are more than 1.5 mm
thick, use position 2.
2 Set the collection table position accord-
ing to the size of the book.
Read the settings through the window.
These settings are recommendations. The settings can change with the size, thickness, and
material of book. Make further adjustments if necessary.
Adjust the Stacker
54
Chapter 5 - Standard Tasks
To Next Page
Loading...