Panoramic and 3D Modality User guide for CS 8100 3D Family (SM842) Ed07 11
3 Imaging Software Overview
Computer System Requirements
For the minimum computer system requirements and configuration for the Imaging Software,
see the CS 8100 3D Family Safety, Regulatory and Technical Specifications User Guide.
General Software Overview
The CS 8100 3D operates with the following software:
• Imaging Software
• Acquisition interface
The following 3D Object Acquisition options are also available:
• CS Restore: Acquires 3D representations of digital X-ray images that are used for
dental restorative workflows.
• CS Model: Acquires 3D representations of digital X-ray images that are used for
orthodontic workflows.
• Appliance: Acquires 3D representations of guided surgical images for double-scan
protocol producing acquisition files that are compatible with competitor solutions.
For user instructions see Chapter 7—3D Object Acquisition.
Imaging Software
The Imaging Software is a user-friendly working interface designed and developed specifically
to support image diagnosis.
Acquisition Interface
The Acquisition interface is a user-friendly interface designed and developed specifically for
the CS 8100 3D Family.
The Acquisition interface has the following features:
• The Panoramic Acquisition interface.
• The 3D Acquisition interface.
WARNING: It is MANDATORY to check that the computer system
configuration is compatible with the computer system requirements
for the CS 8100 3D Family software. If necessary you MUST update
your computer system configuration.
The CS 8100 3D Family MUST be connected to the computer via a
point-to-point Ethernet link and not via a LAN.
To Next Page
Loading...
