Carestream CS 8100 3D - Acquiring a 3 D Focused Teeth Image

Panoramic and 3D Modality User guide for CS 8100 3D Family (SM842) Ed07 41
6 Acquiring 3D Images
Acquiring a 3D Image of the Full, Upper and Lower Jaw for the Adult
and Pediatric Patient
Before acquiring an image, check that you have:
• Reset the unit rotative arm to the patient entry position for patient to enter the unit.
• Selected the patient record.
• Accessed the imaging window.
• Accessed the 3D Acquisition Interface.
Preparing the Unit and Setting the Acquisition Parameters
To set the acquisition parameters, follow these steps:
1. In the 3D Acquisition Interface, click the Patient button to access the Patient pane.
Select the patient type:
• Child
• Adult: Small, Medium, Large
2. Click the Program button to access the Program pane.
3. Click on one of the following programs and select the area of interest that you intend to examine:
Important: See the CS 8100 3D Family Safety, Regulatory and Technical
Specifications User Guide (SM844) for information on radiation protection
and recommendations when you select a patient type.