60
FACTORY RESET SETUP Menu
The purpose of this menu is to allow the operator to return the welding machine partially or totally to the factory settings.
To access the FACTORY RESET Menu from the SETUP Menu:
• Turn the ENCODER K
NOB - SX to select the desired icon.
• Push the ENTER/MEM K
EY.
MENU KEY ENTER/MEM KEY
ENCODER KNOB - SX ENCODER KNOB - DX
VISION SCREEN
SX KEY DX KEY
RESET PROGRAM
RESET PROCESS DATA
DELETE ALL JOBS
COUNTER ALARMS RESET
TOTAL RESET
Within the FACTORY RESET Menu it is possible, by rotating the ENCODER KNOB - SX, to select the individual RESET required,
from the 5 functions available:
Function Description
RESET PROGRAM
RESET PROGRAM (0011)
RESET PROCESS DATA MIG/MAG SYNERGIC
DELETE ALL JOBS
COUNTER ALARMS RESET
TOTAL RESET
EXECUTE PROGRAM RESET?
Used to return the Special functions (Fx) of the PROGRAM that the operator is using to
their DEFAULT settings (only for welding processes for which welding programs are set
beforehand).
NOTE: The welding PROGRAM NUMBER for which the Special Functions (Fx) are to be
returned to the factory settings is indicated on the VISION S
CREEN.
RESET PROCESS DATA
RESET PROGRAM (0011)
RESET PROCESS DATA MIG/MAG SYNERGIC
DELETE ALL JOBS
COUNTER ALARMS RESET
TOTAL RESET
EXECUTE DATA PROCESS RESET?
Used to return the Special functions (Fx) of the welding PROCESS the operator is using
to their DEFAULT settings.
NOTE: The welding PROCESS for which the Special Functions (Fx) are to be returned to
the factory settings, is indicated on the VISION S
CREEN.
DELETE ALL JOBS
RESET PROGRAM (0011)
RESET PROCESS DATA MIG/MAG SYNERGIC
DELETE ALL JOBS
COUNTER ALARMS RESET
TOTAL RESET
CONFIRM DELETE ALL JOB?
Used to delete all the JOBS saved previously by the operator.
WARNING: Remember that, when it leaves the factory the welding machine DOES NOT
HAVE any JOB saved in it!
COUNTER ALARMS RESET
RESET PROGRAM (0011)
RESET PROCESS DATA MIG/MAG SYNERGIC
DELETE ALL JOBS
COUNTER ALARMS RESET
TOTAL RESET
EXECUTE COUNTER ALARMS RESET?
Used to reset the counters for all the alarms (Curr. - Tot. ---- see ERROR LOG Menu) that
have occurred in the welding plant.
WARNING: This operation resets the counters for the alarms but does not delete the
individual alarms!
TOTAL RESET
RESET PROGRAM (0011)
RESET PROCESS DATA MIG/MAG SYNERGIC
DELETE ALL JOBS
COUNTER ALARMS RESET
TOTAL RESET
EXECUTE TOTAL RESET?
Used to return the welding plant to the factory settings.
WARNING: Resetting will take place as soon as the key is released to confirm the
operation!
To Next Page
Loading...
