CipherLab 8000 User Manual

167
Appendix V Command Line Syntax
Argument
Each argument is explained in the table below. If command line arguments are not given, you may
select the appropriate parameters from the dialog box that pops up.
Argument Description
File name Max length: 256 bytes
Full-path file name is required when file is not in the current working
directory.
Upload via Range: 1~4
It is set to 1 by default in the utility program.
 1
(R) : RS-232/IrDA/USB VCOM
 2
(I) : Cradle-IR
 3
(T) : Modem-TAPI
 4
(M) : Modem-COM
COM port Range: 1~255
It is set to 1 by default in the utility program.
Baud rate Range: 1~5
It is set to 1 by default in the utility program.
 1
(115200)
: 115200 bps
 2
( 57600) : 57600 bps
 3
( 38400) : 38400 bps
 4
( 19200) : 19200 bps
 5
( 9600) : 9600 bps
Save mode Range: 1~5
It is set to 1 by default in the utility program.
 1:
Overwrite
 2:
Append
 3:
Keyboard emulation
 4:
Auto file name
 5:
Auto append
Add CR character Range: 0~1
It is set to 1 by default in the utility program.
 0:
Disable
 1:
Enable

CipherLab 8000 Specifications

General

Operating System	Proprietary
Humidity	5% to 95% non-condensing
Barcode Scanner	Laser
Connectivity	RS-232
Ports	RS-232
Weight (Extended)	280g (with battery)
Storage Temperature	-20°C to 60°C
Drop Specification	1.2m