Contents
viii
Cisco 1240 Connected Grid Router Hardware Installation Guide
OL-26223-04
Antenna Ports 10-5
Unused Antenna Ports 10-5
Antenna Port Numbering 10-6
Antenna Installation Location 10-7
Safety Information 10-9
Antenna Technical Specifications 10-9
GPS Antenna Specifications 10-9
WiFi Antenna Specifications 10-10
CHAPTER
11 Using the SD Flash Memory Module 11-1
SD Flash Memory Module 11-1
SD Card File System 11-1
Supported SD Cards 11-2
Accessing the SD Card 11-2
Accessing the SD Card on a Router with a Mounting Bracket 11-2
SD Card Status 11-4
SD Card LED 11-4
Securing the SD Card with a Password 11-5
Setting and Removing an SD Card Password 11-5
Displaying the SD Card Password Status 11-5
Related Commands 11-5
copy running-config startup-config 11-6
sd-card password 11-6
no sd-card password 11-6
show sd-card password status 11-6
CHAPTER
12 Installing Battery Backup Units 12-1
Battery Backup Units 12-1
Battery Backup Operations 12-1
BBU Status 12-2
Battery Backup Mode 12-3
BBU Firmware Upgrade 12-4
BBU Capacity 12-4
Preparing to Install the BBU 12-4
Tools You Supply 12-4
Safety Information for Installation 12-4
Safety Warnings 12-4
Preventing Electrostatic Discharge Damage 12-5
To Next Page
Loading...
