Cisco 1240 - Page 9

Contents
ix
Cisco 1240 Connected Grid Router Hardware Installation Guide
OL-26223-04
BBU Components 12-5
Battery-to-Battery Connectors 12-6
Battery-to-Router Connector 12-8
Locating Pin and Notch 12-8
Installing a BBU in the Router 12-9
Online Insertion and Removal 12-10
Installation Illustrations 12-10
Installation Procedures 12-10
Installing BBU 0 12-13
Installing BBU 1 or BBU 2 12-13
Disabling and Enabling the BBU in the Router 12-14
Disabling the BBU 12-14
Disabling the BBU via Hardware 12-14
Disabling the BBU via the CLI 12-16
Enabling the BBU 12-18
Enabling the BBU via Hardware 12-18
Enabling the BBU via the CLI 12-19
Battery Backup Unit LED 12-22
Related Commands 12-23
CG-OS Battery Backup Commands 12-23
backup-battery firmware upgrade 12-23
show environment power 12-23
backup-battery enable 12-24
backup-battery disable 12-24
backup-battery reset 12-25
backup-battery hard-reset 12-25
backup-battery inhibit discharge 12-25
poweroff module number backup-battery 12-26
Cisco IOS Battery Backup Commands 12-27
battery charge-discharge 12-27
show platform battery 12-28
show environment power 12-33
BBU Technical Specifications 12-33
Router Power Path Selection 12-34
Discharge Conditions 12-34
Charge Conditions 12-35
Operating and Storage Temperatures 12-35
Battery Life 12-35