Cisco 7975G - Qos Configuration Menu

Table 27: Security Configuration Menu Options
To changeDescriptionOption
From Cisco Unified Communications
Manager Administration, choose Device >
Phone > Phone Configuration.
Indicates whether the access port on
the phone is enabled or disabled.
If disabled, video will not
work on this phone, even if
video is enabled.
Note
PC Port Disabled
From Cisco Unified Communications
Manager Administration, choose Device >
Phone > Phone Configuration.
Indicates if the phone accepts MAC
addresses from Gratuitous ARP
responses.
GARP Enabled
From Cisco Unified Communications
Manager Administration, choose Device >
Phone > Phone Configuration.
Indicates whether the phone allows
a device attached to the access port
to access the Voice VLAN.
Setting this option to No (disabled)
prevents the attached PC from
sending and receiving data on the
Voice VLAN. This setting also
prevents the PC from receiving data
that the phone sends and receives.
Set this option to Yes (enabled) if an
application that requires phone traffic
monitoring is running on the PC.
These applications include
monitoring and recording
applications and network monitoring
software.
Voice VLAN Enabled
For more information, see Control Web Page
Access, on page 199.
Indicates whether web access is
enabled (Yes) or disabled (No) for
the phone.
Web Access Enabled
Use Cisco Unified Communications Manager
Administration to modify.
Displays the security mode that is set
for the phone.
Security Mode
For use by the Cisco Technical Assistance Center (TAC), if necessary.Logging Display
QoS Configuration Menu
The QoS Configuration menu displays information that relates to quality of service (QoS) for the phone. The
following table describes the options on this menu.
Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G Administration Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
102
Cisco Unified IP Phone Settings
QoS Configuration Menu