Status Menu
The Status menu includes these options, which provide information about the phone and its operation:
•
Status Messages: Displays the Status Messages screen, which shows a log of important system messages.
•
Network Statistics: Displays the Network Statistics screen, which shows Ethernet traffic statistics.
•
Firmware Versions: Displays the Firmware Versions screen, which shows information about the firmware
that is running on the phone.
•
Expansion Modules: Displays the Expansion Modules screen, which shows information about the
Cisco Unified IP Phone Expansion Modules, if connected to the phone.
Related Topics
Status Messages Screen, on page 177
Network Statistics Screen, on page 186
Expansion Modules Screen, on page 190
Firmware Version Screen, on page 189
Display Status Menu
Procedure
Step 1
Press Apps.
Step 2
Select Admin Settings > Status Menu.
Status Messages Screen
The Status Messages screen displays the 10 most recent status messages that the phone has generated. You
can access this screen at any time, even if the phone has not finished starting up. See Status Messages, on
page 178, which describes the status messages that might display. This table also includes actions that you can
take to address errors.
Display Status Messages Screen
To display the Status Messages screen, follow these steps:
Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G Administration Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
177
Model Information, Status, and Statistics
Status Menu
To Next Page
Loading...
