Network Statistics Screen
The Network Statistics screen displays information about the phone and network performance. Network
Statistics Items, on page 186 describes the information that displays in this screen.
Display Network Statistics Screen
To display the Network Statistics screen, perform these steps:
Procedure
Step 1
Press Applications.
Step 2
Select Settings.
Step 3
Select Status.
Step 4
Select Network Statistics.
Step 5
To reset the Rx Frames, Tx Frames, and Rx Broadcasts statistics to 0, press Clear.
Network Statistics Items
The following table describes the Network Statistics items.
Table 44: Network Statistics Information
DescriptionItem
Number of packets that the phone receivesRx Frames
Number of packets that the phone sendsTx Frames
Number of broadcast packets that the phone receivesRx Broadcasts
Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G Administration Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
186
Model Information, Status, and Statistics
Network Statistics Screen
To Next Page
Loading...
