DescriptionItem
Indicator of a voice message on any line of this phoneMessage Waiting
Displays the following Cisco Unique Device Identifier (UDI) information about
the phone:
•
Device Type: Indicates hardware type. For example, phone displays for
all phone models.
•
Device Description: Displays the name of the phone that is associated with
the indicated model type.
•
Product Identifier: Specifies the phone model.
•
Version Identifier: Represents the hardware version of the phone.
The Version Identifier field might display blank if using an older model
Cisco Unified IP Phone because the hardware does not provide this
information.
•
Serial Number: Displays the unique serial number of the phone.
UDI
Time obtained from the Date/Time Group in Cisco Unified Communications
Manager to which the phone belongs.
Time
Time zone obtained from the Date/Time Group in Cisco Unified Communications
Manager to which the phone belongs.
Time Zone
Date obtained from the Date/Time Group in Cisco Unified Communications
Manager to which the phone belongs.
Date
Indicates whether Link Layer Discovery Protocol (LLDP) is enabled on the PC
port.
LLDP: PC Port
Indicates whether Link Layer Discovery Protocol Media Endpoint Discovery
(LLDP-MED) is enabled on the switch port.
LLDP-MED: SW Port
Network Configuration Area
The Network Configuration area on a phone web page displays network configuration information and
information about other phone settings. The following table describes this information.
You can view and set many of these items from the Network Configuration Menu and the Device Configuration
Menu on the Cisco Unified IP Phone. For more information, see Features, Templates, Services, and Users,
on page 123.
To display the Network Configuration area, access the web page for the phone as described in the Access
Web Page for Phone, on page 198, and then click the Network Configuration hyperlink.
Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G Administration Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
201
Remote Monitoring
Network Configuration Area
To Next Page
Loading...
