Cisco 7975G - Set Ipv6 Configuration Fields; Set Domain Name Field

Set IPv6 Configuration Fields
Procedure
Step 1
Unlock network configuration options.
Step 2
Scroll to IPv6 Configuration and press the Select softkey.
Set Domain Name Field
Procedure
Step 1
Unlock network configuration options.
Step 2
To disable DHCP, perform one of the following actions:
•
If the IP Addressing mode is configured for IPv4 only, set the DHCP option to No.
•
If the IP Addressing mode is configured for IPv6 only, set the DHCPv6 option to No.
•
If the IP Addressing mode is configured for both IPv4 and IPv6, set both DHCP option and DHCPv6
to No.
Step 3
Scroll to the Domain Name option.
Step 4
Press Edit.
Step 5
Enter a new domain name.
Step 6
Press Validate.
Step 7
Press Save.
Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G Administration Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
76
Cisco Unified IP Phone Settings
Set IPv6 Configuration Fields