Cisco 7975G - Feature Support by Protocol for Cisco Unified IP Phones

APPENDIX B
Feature Support by Protocol for Cisco Unified IP
Phones
This appendix provides information about feature support for the Cisco Unified IP Phones using the SCCP
or SIP protocol with Cisco Unified Communications Manager Release 8.6.
The following table provides a high-level overview of calling features and their support by protocol. This
table focuses primarily on end user calling features and is not intended to represent a comprehensive listing
of all available phone features. For details about user interface differences and feature use, see the Cisco
Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G User Guide.
The guide is available at this URL:
http://www.cisco.com/en/US/products/hw/phones/ps379/tsd_products_support_series_home.html
The specific sections that describe the features in the user guide are referenced in the table.
Table 58: Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G Feature Support by Protocol
For more informationProtocol: SIPProtocol: SCCPFeatures
Calling features
Calling features: Additional call optionsSupportedSupportedAbbreviated
Dialing
Calling features: Call answerSupportedSupportedAgent Greeting
SupportedNot supportedAnonymous Call
Block
Calling features: Advanced call handling - Call parkSupportedNot supportedAssisted Directed
Call Park
Voice messagesSupportedSupportedAudible Message
Waiting Indicator
Handset, headset, and speakerphoneSupportedSupportedAutoAnswer
Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G Administration Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
247