Cisco 7975G Software Guide

Cisco Unified IP Phone 7900 Series eLearning Tutorials for SCCP
Phones
Cisco Unified IP Phone 7900 Series eLearning tutorials use audio and animation to demonstrate basic calling
features for SCCP phones. The eLearning tutorials are currently available for the Cisco Unified IP Phone
7970 Series (7970G, 7971G-GE) and the Cisco Unified IP Phone models 7905G, 7912G, 7940G, 7941G,
7941G-GE, 7960G, 7961G, and 7961G-GE.
Users can access runtime versions of the eLearning tutorials (English only) from Cisco.com by looking for
tutorials under relevant phone models at this site:
http://cisco.com/en/US/products/hw/phones/ps379/products_user_guide_list.htmlhttp://cisco.com/en/US/
products/hw/phones/ps379/products_user_guide_list.html
Administrators can download customizable versions of the eLearning tutorials (English only) from the phone
product pages on cisco.com at
http://cisco.com/en/US/products/hw/phones/ps379/prod_models_home.html
Refer to the tutorial Read Me file that is included with the relevant eLearning tutorial for specific instructions,
including how to link to the most recent user guide PDF.
The eLearning tutorials are updated periodically and therefore might not contain the latest feature
information for users. For the latest feature information, see the Cisco Unified IP Phone User Guide that
applies to the phone model and Cisco Unified Communications Manager version.
Note
Phone Features User Subscription and Setup
Users can perform a variety of activities by using the Cisco Unified Communications Manager User Options
web pages. These activities include subscribing to services, setting up speed dial and call forwarding numbers,
configuring ring settings, and creating a personal address book. Keep in mind that configuring settings on a
phone using a website might be new for your users. You need to provide as much information as possible to
ensure that they can successfully access and use the User Options web pages.
Make sure to provide users with the following information about the User Options web pages:
•
The URL required to access the application. This URL is:
http://<server_name:portnumber>/ccmuser/, where server_name is the host on which the web server
is installed.
•
A user ID and default password are needed to access the application.
These settings correspond to the values you entered when you added the user to Cisco Unified
Communications Manager (see Cisco Unified Communications Manager User Addition, on page 154).
•
A brief description of what a web-based, graphical user interface application is, and how to access it
with a web browser.
•
An overview of the tasks that users can accomplish by using the web page.
Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G Administration Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
243
Internal Support Web Site
Cisco Unified IP Phone 7900 Series eLearning Tutorials for SCCP Phones

Cisco 7975G Specifications

General

Handset type	Wired handset
Product type	IP Phone
Product color	Grey, Silver
Speakerphone	Yes
Voice codecs	G.711Mu, G.711a, G.722, G.729A, iLBC
Number of melodies	24
Aspect ratio	4:3
Display diagonal	5.6 \
Display resolution	320 x 240 pixels
Lines quantity	8 lines
Phonebook capacity	- entries
Number of VoIP accounts	-
Front camera	No
Security algorithms	128-bit AES
Networking standards	IEEE 802.1Q, IEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Supported network protocols	DHCP, TFTP
Volume control	Digital
Headphone outputs	1
Ethernet LAN (RJ-45) ports	2
Number of handles included	1 pc(s)
AC adapter output voltage	48 V
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Certification	FCC

Weight and Dimensions

Depth	152.4 mm
Width	266.7 mm
Height	203.2 mm
Weight	1600 g