Cisco 7975G Software Guide

Cisco Unified IP Phones 7970G and 7971G-GE Cable Lock
For an illustration on how to connect a cable lock to the Cisco Unified IP Phones 7970G and 7971G-GE, see
the following figure.
Figure 3: Connect a Cable Lock
Mount Phone on Wall
You can mount the Cisco Unified IP Phone on the wall by using the footstand as a mounting bracket, or you
can use special brackets available in a Cisco Unified IP Phone wall mount kit. Wall mount kits must be ordered
separately from the phone.
If you attach the Cisco Unified IP Phone to a wall with the standard footstand and not the wall mount kit, you
need to supply the following tools and parts:
•
Screwdriver
•
Screws to secure the Cisco Unified IP Phone to the wall
Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G Administration Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
55
Cisco Unified IP Phones Installation
Cisco Unified IP Phones 7970G and 7971G-GE Cable Lock

Cisco 7975G Specifications

General

Handset type	Wired handset
Product type	IP Phone
Product color	Grey, Silver
Speakerphone	Yes
Voice codecs	G.711Mu, G.711a, G.722, G.729A, iLBC
Number of melodies	24
Aspect ratio	4:3
Display diagonal	5.6 \
Display resolution	320 x 240 pixels
Lines quantity	8 lines
Phonebook capacity	- entries
Number of VoIP accounts	-
Front camera	No
Security algorithms	128-bit AES
Networking standards	IEEE 802.1Q, IEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Supported network protocols	DHCP, TFTP
Volume control	Digital
Headphone outputs	1
Ethernet LAN (RJ-45) ports	2
Number of handles included	1 pc(s)
AC adapter output voltage	48 V
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Certification	FCC

Weight and Dimensions

Depth	152.4 mm
Width	266.7 mm
Height	203.2 mm
Weight	1600 g