Cisco 7975G - Cisco Unified IP Phone and HTTP or HTTPS Protocols; Device Information Area

Cisco Unified IP Phone and HTTP or HTTPS Protocols
The Cisco Unified IP Phone can be configured to use:
•
HTTPS protocol only
•
HTTP or HTTPS protocols
If your Cisco Unified IP Phone is configured to use the HTTP or HTTPS protocols, use http://<IP_address>
or https://<IP_address> for phone web access.
If your Cisco Unified IP Phone is configured to use only HTTPS protocol, use https://<IP_address> for phone
web access.
Device Information Area
The Device Information area on a phone web page displays device settings and related information for the
phone. The following table describes these items.
To display the Device Information area, access the web page for the phone as described in Access Web Page
for Phone, on page 198, and then click the Device Information hyperlink.
Table 48: Device Information Area Items
DescriptionItem
Media Access Control (MAC) address of the phoneMAC Address
Unique, fixed name that is automatically assigned to the phone based on its
MAC address
Host Name
Directory number assigned to the phonePhone DN
Identifier of the firmware running on the phoneApp Load ID
Identifier of the factory-installed load running on the phoneBoot Load ID
Version of the firmware running on the phoneVersion
Phone load ID for the first Cisco Unified IP Phone Expansion Module.Expansion Module 1
Phone load ID for the second Cisco Unified IP Phone Expansion Module.Expansion Module 2
Revision value of the phone hardwareHardware Revision
Serial number of the phoneSerial Number
Model number of the phoneModel Number
Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G Administration Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
200
Remote Monitoring
Cisco Unified IP Phone and HTTP or HTTPS Protocols