To changeDescriptionOption
For more information, see Trust
List Menu, on page 115.
The Trust List is a top-level menu that
provides submenus for the CTL, ITL, and
Signed Configuration files.
The CTL File submenu displays the contents
of the CTL file. The ITL File submenu
displays contents of the ITL file. The CTL
and ITL files submenus also display the MD5
hash of the file. The MD5 hash value from
the phone can be compared with the MD5
hash value of the file from the TFTP server
to verify if the correct file is installed on the
phone.
The Signed Configuration File submenu
displays the SRST certificate that is installed
via the authenticated digitally signed
configuration file.
Trust List
See 802.1X Authentication and
Status Menus, on page 116.
Allows you to enable 802.1X authentication
for this phone.
802.1X Authentication
Display only. Cannot configure.Displays real-time status progress of the
802.1X authentication transaction.
802.1X Authentication
Status
For more information, see the
“Configuring Virtual Private
Networks” chapter in Cisco Unified
Communications Manager Security
Guide.
Allows you to configure VPN configuration
for this phone.
(Supported only for the Cisco Unified IP
Phone 7945G, 7965G, and 7975G.)
VPN Configuration
CTL File Submenu
The CTL File screen includes the options that are described in the following table.
If a CTL file is installed on the phone, you can access the CTL File menu by pressing the Settings button and
choosing Security Configuration > Trust List.
Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G Administration Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
111
Cisco Unified IP Phone Settings
CTL File Submenu