Cisco 7975G - Appendix E; Phone Administration Overview; Example User Information; Basic Phone Administration Steps

APPENDIX E
Basic Phone Administration Steps
•
Phone Administration Overview, page 263
•
Example User Information, page 263
•
Cisco Unified Communications Manager User Addition, page 264
•
Phone Setup, page 265
•
Perform Final End User Setup, page 268
Phone Administration Overview
This appendix provides minimum, basic configuration steps for you to perform the following actions:
•
Add a new user to Cisco Unified Communications Manager Administration
•
Configure a new phone for that user
•
Associate that user to that phone
•
Complete other basic end-user configuration tasks
The procedures provide one method for performing these tasks and are not the only way to perform these
tasks. They are a streamlined approach to get a new user and corresponding phone running on the system.
These procedures are designed to be used on a mature Cisco Unified Communications Manager system where
calling search spaces, partitions, and other complicated configuration have already been done and are in place
for existing users.
Example User Information
In the procedures that follow, examples are given when possible to illustrate some of the steps. Example user
and phone information used throughout these procedures includes:
• User’s Name: John Doe
•
User ID: johndoe
•
MAC address listed on phone: 00127F576611
Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G Administration Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
263