Results of actionSecurity level of
participants
Feature usedInitiator phone
security level
Secure conference bridge
Conference remains secure
(encrypted or authenticated)
Encrypted or authenticatedJoinSecure (encrypted)
Secure conference bridge
Conference changes to
nonsecure
All participants are
encrypted
cBargeNonsecure
Initiator receives message
Does not meet
Security Level, call
rejected.
Minimum security level is
encrypted
Meet-MeNonsecure
Secure conference bridge
Conference accepts encrypted
and authenticated calls
Minimum security level is
authenticated
Meet-MeSecure (encrypted)
Only secure conference bridge
available and used
Conference accepts all calls
Minimum security level is
nonsecure
Meet-MeSecure (encrypted)
802.1X Authentication
These sections provide information about 802.1X support on the Cisco Unified IP Phones:
Overview
Cisco Unified IP Phones and Cisco Catalyst switches traditionally use Cisco Discovery Protocol (CDP) to
identify each other and determine parameters such as VLAN allocation and inline power requirements. CDP
does not identify locally attached workstations. Cisco Unified IP Phones provide an EAPOL pass-through
mechanism. This mechanism allows a workstation attached to the Cisco Unified IP Phone to pass EAPOL
messages to the 802.1X authenticator at the LAN switch. The pass-through mechanism ensures that the IP
phone does not act as the LAN switch to authenticate a data endpoint before accessing the network.
Cisco Unified IP Phones also provide a proxy EAPOL Logoff mechanism. In the event that the locally attached
PC disconnects from the IP phone, the LAN switch does not see the physical link fail, because the link between
the LAN switch and the IP phone is maintained. To avoid compromising network integrity, the IP phone sends
an EAPOL-Logoff message to the switch on behalf of the downstream PC, which triggers the LAN switch to
clear the authentication entry for the downstream PC.
Cisco Unified IP Phones also contain an 802.1X supplicant. This supplicant allows network administrators
to control the connectivity of IP phones to the LAN switch ports. The current release of the phone 802.1X
supplicant uses the EAP-FAST, EAP-TLS, and EAP-MD5 options for network authentication.
Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G Administration Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
21
Cisco Unified IP Phone
802.1X Authentication
To Next Page
Loading...
Need help?
General
Weight and Dimensions
