Cisco 7975G - Device Logs Area; Streaming Statistics

DescriptionItem
Total number of LLDP TLVs that are discardedLLDP TLVDiscardedTotal
Total number of LLDP TLVs that are not recognized on the phoneLLDP
TLVUnrecognizedTotal
Identifier of a device connected to this port discovered by CDP protocolCDP Neighbor Device ID
IP address of the neighbor device discovered by CDP protocolCDP Neighbor IP Address
Neighbor device port to which the phone is connected discovered by CDP
protocol
CDP Neighbor Port
Identifier of a device connected to this port discovered by LLDP protocolLLDP Neighbor Device ID
IP address of the neighbor device discovered by LLDP protocolLLDP Neighbor IP Address
Neighbor device port to which the phone is connected discovered by LLDP
protocol
LLDP Neighbor Port
Device Logs Area
The Device Logs area on a phone web page provides information that you can use to help monitor and
troubleshoot the phone.
•
Console Logs: Includes hyperlinks to individual log files. The console log files include debug and error
messages received on the phone.
•
Core Dumps: Includes hyperlinks to individual dump files.
•
Status Messages area: Displays up to the 10 most recent status messages that the phone has generated
since it was last powered up. You can also see this information from the Status Messages screen on the
phone. Status Messages Screen, on page 177 describes the status messages that can appear.
To display the Status Messages, access the web page for the phone as described in Access Web Page
for Phone, on page 198, and then click the Status Messages hyperlink.
•
Debug Display area: Displays debug messages that might be useful to Cisco TAC if you require assistance
with troubleshooting.
Streaming Statistics
A Cisco Unified IP Phone can stream information to and from up to three devices simultaneously. A phone
streams information when it is on a call or running a service that sends or receives audio or data.
The streaming statistics areas on a phone web page provide information about the streams. Most calls use
only one stream (Stream 1), but some calls use two or three stream. For example, a barged call uses Stream
1 and Stream 2.
Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G Administration Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
209
Remote Monitoring
Device Logs Area