DescriptionItem
Cause of the last phone resetOne of the following
values:
•
Initialized
•
TCP-timeout
•
CM-closed-TCP
•
TCP-Bad-ACK
•
CM-reset-TCP
•
CM-aborted-TCP
•
CM-NAKed
•
KeepaliveTO
•
Failback
•
Phone-Keypad
•
Phone-Re-IP
•
Reset-Reset
•
Reset-Restart
•
Phone-Reg-Rej
•
Load Rejected HC
•
CM-ICMP-Unreach
•
Phone-Abort
Amount of time that has elapsed since the phone connected to
Cisco Unified Communications Manager
Elapsed Time
Link state and connection of the Network portPort 1
Link state and connection of the PC port. For example, Auto 100 Mb
Full-Duplex means that the PC port is in a link up state and has autonegotiated
a full-duplex, 100-Mbps connection.
Port 2 (applies to 7911G
only)
Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G Administration Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
187
Model Information, Status, and Statistics
Network Statistics Screen
To Next Page
Loading...
