Cisco 7975G - Page 137

To changeDescriptionOption
Choose Settings > Security
Configuration > 802.1X
Authentication > EAP-MD5.
Specifies a password for use with 802.1X
authentication using the following menu
options that are described in the following
rows:
•
Device ID
•
Shared Secret
•
Realm
EAP-MD5
Display only. Cannot configure.Device ID: Derivative of the phone model
number and unique MAC address displayed
in this format: CP-<model>-SEP-<MAC>
Set EAP-MD5 Shared Secret Field,
on page 118
See Cisco Unified IP Phone Security
Problems, on page 222 for recovery
of a deleted shared secret.
Shared Secret: Choose a password to use on
the phone and on the authentication server.
The password must be between 6 and 32
characters in length and can consist of any
combination of numbers or letters.
If you disable 802.1X authentication
or perform a factory reset of the
phone, the shared secret is deleted.
Note
Display only. Cannot configure.Realm: Indicates the user network domain,
always set as Network.
To access the 802.1X Authentication Real-Time menu, press the Settings button and choose Security
Configuration > 802.1X Authentication Status. To exit this menu, press Exit.
Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G Administration Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
117
Cisco Unified IP Phone Settings
802.1X Authentication and Status Menus