Cisco 7975G - Page 149

Configuration referenceDescriptionFeature
For more information, see:
•
Cisco Unified Communications
Manager Administration Guide, “Cisco
Unified IP Phone Configuration” chapter
•
Cisco Unified Communications
Manager System Guide, “Understanding
Route Plans” chapter
•
Cisco Unified Communications
Manager Features and Services Guide,
“Call Display Restrictions” chapter
Determines the information that will display for calling
or connected lines, depending on the parties who are
involved in the call.
Call Display Restrictions
For more information, see:
•
Cisco Unified Communications
Manager Administration Guide,
“Directory Number Configuration”
chapter
•
Cisco Unified Communications
Manager System Guide, “Cisco Unified
IP Phones” chapter
•
User Options Web Pages Options, on
page 156
Allows users to redirect incoming calls to another number.
Call Forward options include Call Forward All, Call
Forward Busy, Call Forward No Answer, and Call
Forward No Coverage.
Call Forward
For more information, see the Cisco Unified
Communications Manager System Guide,
“Understanding Directory Numbers” chapter.
Allows you to override Call Forward All (CFA) in cases
where the CFA target places a call to the CFA initiator.
This feature allows the CFA target to reach the CFA
initiator for important calls. The override works whether
the CFA target phone number is internal or external.
Call Forward All
Destination Override
For more information, see the Cisco Unified
Communications Manager System Guide,
“Cisco Unified IP Phones” chapter.
Detects and prevents Call Forward All loops. When a Call
Forward All loop is detected, the Call Forward All
configuration is ignored and the call rings through.
Call Forward All Loop
Breakout
For more information, see the Cisco Unified
Communications Manager System Guide,
“Cisco Unified IP Phones” chapter.
Prevents a user from configuring a Call Forward All
destination directly on the phone that creates a Call
Forward All loop or that creates a Call Forward All chain
with more hops than the existing Forward Maximum Hop
Count service parameter allows.
Call Forward All Loop
Prevention
Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G Administration Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
129
Features, Templates, Services, and Users
Telephony Features Available for Cisco Unified IP Phone