Preface
•
Overview, page xv
•
Audience, page xv
•
Organization, page xvi
•
Related Documentation, page xvii
•
Documentation, Support, and Security Guidelines, page xvii
•
Cisco Product Security Overview, page xvii
•
Guide Conventions, page xviii
Overview
Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G Administration Guide for Cisco
Unified Communications Manager (SCCP and SIP) provides the information you need to understand, install,
configure, manage, and troubleshoot the Cisco Unified IP Phone on a Voice-over-IP (VoIP) network.
Because of the complexity of a Unified Communications network, this guide does not provide complete and
detailed information for procedures that you need to perform in Cisco Unified Communications Manager
(formerly Cisco Unified CallManager) or on other network devices.
Related Topics
Related Documentation, on page xvii
Audience
Network engineers, system administrators, and telecom engineers should review this guide to learn the steps
that are required to set up Cisco Unified IP Phones. The tasks described in this document involve configuring
network settings that are not intended for phone users. The tasks in this manual require a familiarity with
Cisco Unified Communications Manager.
Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G Administration Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
xv
To Next Page
Loading...
Need help?
General
Weight and Dimensions
