Cisco 7975G - Page 183

Procedure
Step 1
Choose System > Enterprise Phone Configuration.
Step 2
Set the FIPS Mode parameter to Enabled.
Step 3
Set the HTTPS Server parameters to HTTPS only.
Step 4
Set the 80-bit SRTCP parameter to Enabled.
Step 5
Click Save.
Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G Administration Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
163
Features, Templates, Services, and Users
Set Up UCR 2008 in Enterprise Phone Configuration Window