Cisco 7975G - Page 224

DescriptionItem
URL that the phone uses to validate requests made to the phone web server.Authentication URL
Speed and duplex of the switch port, where:
•
A = Auto Negotiate
•
10H = 10-BaseT/half duplex
•
10F = 10-BaseT/full duplex
•
100H = 100-BaseT/half duplex
•
100F = 100-BaseT/full duplex
•
1000H = 1000-BaseT/half duplex
•
1000F = 1000-BaseT/full duplex
•
No Link = No connection to the switch port
SW Port Configuration
Speed and duplex of the switch port, where:
•
A = Autonegotiate
•
10H = 10-BaseT/half duplex
•
10F = 10-BaseT/full duplex
•
100H = 100-BaseT/half duplex
•
100F = 100-BaseT/full duplex
•
1000H = 1000-BaseT/half duplex
•
1000F = 1000-BaseT/full duplex
•
No Link = No connection to the PC port
To configure the setting on multiple phones simultaneously, configure the Remote
Port Configuration in the Enterprise Phone Configuration (System > Enterprise
Phone Configuration).
If the ports are configured for Remote Port Configuration in Unified
CM, the data cannot be changed on the phone.
Note
PC Port Configuration
Backup TFTP server that the phone uses if the primary TFTP server is unavailable.TFTP Server 2
User locale associated with the phone user. Identifies a set of detailed information
to support users, including language, font, date and time formatting, and
alphanumeric keyboard text information.
User Locale
Network locale associated with the phone user. Identifies a set of detailed
information to support the phone in a specific location, including definitions of
the tones and cadences used by the phone.
Network Locale
Indicates whether the Headset button is enabled on the phone.Headset enabled
Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G Administration Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
204
Remote Monitoring
Network Configuration Area