Cisco ATA 192 Administration Guide

TR-069
Use the Administration > Management > TR-069 page to configure communication with an
Auto-Configuration Server (ACS) via TR-069 CPE WAN Management Protocol (CWMP). TR-069 (Technical
Report 069) provides a common platform to manage all voice devices and other customer-premises equipment
(CPE) in large-scale deployments. It provides the communication between the CPE and the ACS.
Enter the settings as described below. After making changes, click Submit to save your settings, or click
Cancel to redisplay the page with the saved settings.
Table 68: TR-069 Settings
DescriptionField
Click Enabled to enable remote provisioning, or click Disabled to
disable this feature. The default setting is Disabled.
Status
The URL for the ACS. The format should be
http(s)://xxx.xxx.xxx.xxx:port or xxx.xxx.xxx.xxx:port. The
xxx.xxx.xxx.xxx is the domain name or IP address of the ACS server.
Both the IP address and the port number are required.
ACS URL
The username for the ACS. The default username is the Organization
Unit Identifier (OUI). This value is required and must match the
username configured on the ACS.
ACS Username
The password for the ACS. This value is required and must match the
password configured on the ACS.
ACS Password
The port to use for connection requestsConnection Request Port
The username for connection requests. This value must match the
Connection Request Username configured on the ACS.
Connection Request Username
The password for connection requests. This value must match the
Connection Request Password configured on the ACS.
Connection Request Password
If Periodic Inform is enabled, the duration, in seconds, between CPE
attempts to connect to the ACS. The default value is 86400 seconds.
Periodic Inform Interval
Click Enabled to enable CPE connection requests to the ACS, or click
Disabled to disable this feature.
Periodic Inform Enable
If applied, ACS may call the Download RPC after it receives the request
from the ATA.
Request Download
Cisco ATA 191 and ATA 192 Analog Telephone Adapter Administration Guide for Multiplatform Firmware
98
Administration Settings
TR-069

Cisco ATA 192 Specifications

General

Ports	2 FXS ports
Network Interface	10/100 Ethernet
Voice Protocol	SIP
Audio Codecs	G.711, G.726, G.729
Operating Temperature	0 to 40°C (32 to 104°F)
Storage Temperature	-20 to 60°C (-4 to 140°F)
Humidity	10 to 90% non-condensing
Compliance	FCC, CE, UL
Fax Support	T.38, G.711 pass-through