CSS Dump
Use the Administration > Log > CSS Dump page to set and download CSS dump file.
Table 78: CSS Dump Settings
DescriptionField
Set the CSS Memory dump function to Enabled or
Disabled.
Default value: Disabled
CSS Memory Dump
Show the CSS memory dump file store on ATA. Click
the file name to download it.
CSS Memory Dump File
Click Refresh to refresh the CSS Memory Dump
File.
Refresh
Factory Defaults
Use the Administration > Factory DefaultsATA web page to reset the ATA to the default configuration.
Alternatively, press and hold the RESET button for 20 seconds. All user-changeable non-default settings will
be lost. This may include network and service provider data.
You can perform the following tasks:
•
Restore Router Factory Defaults: Choose Yes to remove any custom data (router) settings that you have
configured. The default settings will be restored when you click Submit.
•
Restore Voice Factory Defaults: Choose Yes to remove any custom settings that you configured on the
Voice pages of the ATA web page. The default settings will be restored when you click Submit.
Firmware Upgrade
Use the Administration > Firmware Upgrade page to upgrade the firmware on the ATA. It is not necessary
to upgrade unless you are experiencing problems with the ATA or if the new firmware has a feature that you
want to use.
Upgrading the firmware may take several minutes. Until the process is complete, DO NOT turn off the
power, press the hardware reset button, or click the Back button in your current browser.
Caution
Before You Begin
Before upgrading the firmware, download the firmware upgrade file for the ATA.
Cisco ATA 191 and ATA 192 Analog Telephone Adapter Administration Guide for Multiplatform Firmware
105
Administration Settings
CSS Dump
To Next Page
Loading...
Need help?
General
