Cisco ATA 192 Administration Guide

Table 6: Optional Settings
DescriptionField
Choose the preferred method for choosing a DNS
server.
•
DHCP-Manual—The DNS server settings from
the network server takes precedence, and your
entries in the DNS fields are used only as a
backup.
•
Manual-DHCP—Your entries in the DNS
fields take precedence, and the DNS server
settings from the network server are used as a
backup.
•
Manual—Your entries in the DNS fields are
used to choose a DNS server.
DNS Server Order
Set the Primary DNS for IPv4.Primary DNS
Set the Secondary DNS for IPv4.Secondary DNS
IPv6 Settings
Use the Network Setup > Basic Setup > IPv6 Settings page to set up your IPv6 connection.
Enter the settings as described in the table. After making changes, click Submit to save your settings, or click
Cancel to redisplay the page with the saved settings.
Cisco ATA 191 and ATA 192 Analog Telephone Adapter Administration Guide for Multiplatform Firmware
18
Network Configuration
IPv6 Settings

Cisco ATA 192 Specifications

General

Ports	2 FXS ports
Network Interface	10/100 Ethernet
Voice Protocol	SIP
Audio Codecs	G.711, G.726, G.729
Operating Temperature	0 to 40°C (32 to 104°F)
Storage Temperature	-20 to 60°C (-4 to 140°F)
Humidity	10 to 90% non-condensing
Compliance	FCC, CE, UL
Fax Support	T.38, G.711 pass-through