Cisco ATA 192 Administration Guide

•
Set up the HTTP server to upload the PRT log file from the ATA.
•
Configure the customer support upload URL to best suit your needs, and apply it to the ATA.
ATA 191 and ATA 192 Back Panel
Figure 3: ATA 191 Back Panel
Figure 4: ATA 192 — Back Panel
Table 2: ATA 191 and ATA 192 Back Panel Items
DescriptionItem
To restart the ATA, use a paper clip or similar object to press this button
briefly.
To restore the factory default settings, press and hold for 10 seconds.
RESET
Use an RJ-11 phone cable to connect an analog phone or fax machine.PHONE 1
Cisco ATA 191 and ATA 192 Analog Telephone Adapter Administration Guide for Multiplatform Firmware
5
Get Started
ATA 191 and ATA 192 Back Panel

Cisco ATA 192 Specifications

General

Ports	2 FXS ports
Network Interface	10/100 Ethernet
Voice Protocol	SIP
Audio Codecs	G.711, G.726, G.729
Operating Temperature	0 to 40°C (32 to 104°F)
Storage Temperature	-20 to 60°C (-4 to 140°F)
Humidity	10 to 90% non-condensing
Compliance	FCC, CE, UL
Fax Support	T.38, G.711 pass-through