Cisco ATA 192 Administration Guide

DescriptionField
Cadence script for distinctive CWT 7.
Default setting: 30(.3/.1,.3/.1,.1/9.1)
CWT7 Cadence
Cadence script for distinctive CWT 8.
Default setting: 2.3(.3/2)
CWT8 Cadence
Distinctive Ring/CWT Pattern Names
Table 40: Distinctive Ring/CWT Patterns
DescriptionField
Name in an INVITE’s Alert-Info Header to pick distinctive ring/CWT
1 for the inbound call.
Default setting: Bellcore-r1
Ring1 Name
Name in an INVITE’s Alert-Info Header to pick distinctive ring/CWT
2 for the inbound call.
Default setting: Bellcore-r2
Ring2 Name
Name in an INVITE’s Alert-Info Header to pick distinctive ring/CWT
3 for the inbound call.
Default setting: Bellcore-r3
Ring3 Name
Name in an INVITE’s Alert-Info Header to pick distinctive ring/CWT
4 for the inbound call.
Default setting: Bellcore-r4
Ring4 Name
Name in an INVITE’s Alert-Info Header to pick distinctive ring/CWT
5 for the inbound call.
Default setting: Bellcore-r5
Ring5 Name
Name in an INVITE’s Alert-Info Header to pick distinctive ring/CWT
6 for the inbound call.
Default setting: Bellcore-r6
Ring6 Name
Name in an INVITE’s Alert-Info Header to pick distinctive ring/CWT
7 for the inbound call.
Default setting: Bellcore-r7
Ring7 Name
Cisco ATA 191 and ATA 192 Analog Telephone Adapter Administration Guide for Multiplatform Firmware
60
Voice Settings Configuration
Distinctive Ring/CWT Pattern Names

Cisco ATA 192 Specifications

General

Ports	2 FXS ports
Network Interface	10/100 Ethernet
Voice Protocol	SIP
Audio Codecs	G.711, G.726, G.729
Operating Temperature	0 to 40°C (32 to 104°F)
Storage Temperature	-20 to 60°C (-4 to 140°F)
Humidity	10 to 90% non-condensing
Compliance	FCC, CE, UL
Fax Support	T.38, G.711 pass-through