EasyManuals Logo

Cisco ATA 192 Administration Guide

Cisco ATA 192
142 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #83 background imageLoading...
Page #83 background image
SIP Settings
Table 51: SIP Settings
DescriptionField
The TCP choice provides guaranteed delivery, which assures that lost
packets are retransmitted. TCP also guarantees that the SIP packages
are received in the same order that they were sent. As a result, TCP
overcomes the main disadvantages of UDP. In addition, for security
reasons, most corporate firewalls block UDP ports. With TCP, new
ports don't need to be opened or packets dropped for activities such as
Internet browsing or e-commerce.
SIP Transport
Port number of the SIP message listening and transmission port.
Default setting: 5060 for PHONE1 and 5061 for PHONE2
SIP Port
To enable the support of 100REL SIP extension for reliable transmission
of provisional responses (18x) and use of PRACK requests, select yes.
Otherwise, select No.
Default setting: No
SIP 100REL Enable
The external SIP port number.
Default setting: blank
EXT SIP Port
If this feature is enabled, the ATA authenticates the sender when it
receives the NOTIFY resync reboot (RFC 2617) message. To use this
feature, select Yes. Otherwise, select No.
Default setting: Yes
Auth Resync-Reboot
The SIP proxy can support a specific extension or behavior when it sees
this header from the user agent. If this field is configured and the proxy
does not support it, it responds with the message, unsupported. Enter
the appropriate header in the field provided.
Default setting: blank
SIP Proxy-Require
To use the Remote-Party-ID header instead of the From header, select
Yes. Otherwise, select No.
Default setting: Yes
SIP Remote-Party-ID
This feature limits the registration of SIP accounts. The Global Unique
ID is generated for each line for each ATA. When it is enabled, the
ATA adds a GUID header in the SIP request. The GUID is generated
the first time the unit boots up and stays with the unit through rebooting
and even factory reset.
Default setting: No
SIP GUID
Cisco ATA 191 and ATA 192 Analog Telephone Adapter Administration Guide for Multiplatform Firmware
75
Voice Settings Configuration
SIP Settings

Table of Contents

Other manuals for Cisco ATA 192

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco ATA 192 and is the answer not in the manual?

Cisco ATA 192 Specifications

General IconGeneral
Ports2 FXS ports
Network Interface10/100 Ethernet
Voice ProtocolSIP
Audio CodecsG.711, G.726, G.729
Operating Temperature0 to 40°C (32 to 104°F)
Storage Temperature-20 to 60°C (-4 to 140°F)
Humidity10 to 90% non-condensing
ComplianceFCC, CE, UL
Fax SupportT.38, G.711 pass-through

Related product manuals