Cisco ATA 192 Administration Guide

DescriptionField
This parameter is a firmware upgrade script with the
same syntax as Profile_Rule. Defines upgrade
conditions and associated firmware URLs.
Default setting: blank
Upgrade Rule.
Syslog message issued at the start of a firmware
upgrade attempt.
Default setting: $PN $MAC -- Requesting upgrade
$SCHEME://$SERVIP:$PORT$PATH
Log Upgrade Request Msg.
Syslog message issued after a firmware upgrade
attempt completes successfully.
Default setting: $PN $MAC -- Successful upgrade
$SCHEME://$SERVIP:$PORT$PATH -- $ERR
Log Upgrade Success Msg.
Syslog message issued after a failed firmware upgrade
attempt.
Default setting: $PN $MAC -- Upgrade failed: $ERR
Log Upgrade Failure Msg.
CA Settings
Table 35: CA Settings
DescriptionField
The URL of a file location for a custom Certificate
Authority (CA) certificate. Either the IP address or
the FQDN of the server can be specified. The file
name can have macros, such as $MA, which expands
to the ATA MAC address.
Default setting: blank
Custom CA URL
Cisco ATA 191 and ATA 192 Analog Telephone Adapter Administration Guide for Multiplatform Firmware
53
Voice Settings Configuration
CA Settings

Cisco ATA 192 Specifications

General

Ports	2 FXS ports
Network Interface	10/100 Ethernet
Voice Protocol	SIP
Audio Codecs	G.711, G.726, G.729
Operating Temperature	0 to 40°C (32 to 104°F)
Storage Temperature	-20 to 60°C (-4 to 140°F)
Humidity	10 to 90% non-condensing
Compliance	FCC, CE, UL
Fax Support	T.38, G.711 pass-through