Cisco ATA 192 Administration Guide

FreqScript 55
ToneScript 55
Call Progress Tones 56
Distinctive Ring Patterns 58
Distinctive Call Waiting Tone Patterns 59
Distinctive Ring/CWT Pattern Names 60
Ring and Call Waiting Tone Spec 61
Control Timer Values (Sec) 62
Vertical Service Activation Codes 63
Vertical Service Announcement Codes 69
Outbound Call Codec Selection Codes 69
Miscellaneous 70
Line 1 and Line 2 Settings (PHONE 1 and PHONE 2) 72
General 72
Streaming Audio Server (SAS) 72
NAT Settings 73
Network Settings 74
SIP Settings 75
Call Feature Settings 77
Proxy and Registration 78
Subscriber Information 80
Supplementary Service Subscription 81
Audio Configuration 84
Dial Plan 87
FXS Port Polarity Configuration 88
User 1 and User 2 88
Call Forward Settings 89
Selective Call Forward Settings 89
Speed Dial Settings 90
Supplementary Service Settings 90
Distinctive Ring Settings 92
Ring Settings 92
CHAPTER 5 Administration Settings 95
Management 95
Cisco ATA 191 and ATA 192 Analog Telephone Adapter Administration Guide for Multiplatform Firmware
v
Contents

Cisco ATA 192 Specifications

General

Ports	2 FXS ports
Network Interface	10/100 Ethernet
Voice Protocol	SIP
Audio Codecs	G.711, G.726, G.729
Operating Temperature	0 to 40°C (32 to 104°F)
Storage Temperature	-20 to 60°C (-4 to 140°F)
Humidity	10 to 90% non-condensing
Compliance	FCC, CE, UL
Fax Support	T.38, G.711 pass-through