DescriptionField
Determines whether a file-not-found response from
the provisioning server constitutes a successful or a
failed resync. A failed resync activates the error
resync timer.
Default setting: yes
Resync Fails On FNF:
This parameter is a profile script that evaluates to the
provisioning resync command. The command is a
TCP/IP operation and an associated URL. The TCP/IP
operation can be TFTP, HTTP, or HTTPS.
If the command is not specified, TFTP is assumed,
and the address of the TFTP server is obtained
through DHCP option 66. In the URL, either the IP
address or the FQDN of the server can be specified.
The filename can have macros, such as $MA, which
expands to the ATA MAC address.
Default setting: /spa$PSN.cfg
Profile Rule:
Defines second, third, and fourth resync commands
and associated profile URLs. These profile scripts are
executed sequentially after the primary Profile Rule
resync operation has completed. If a resync is
triggered and Profile Rule is blank, Profile Rules B,
C, and D are still evaluated and executed.
Default setting: blank
Profile Rule B:
Profile Rule C:
Profile Rule D:
DHCP Options, delimited by commas, retrieves
firmware and profiles.
Default setting: 66.160.159.150
DHCP Option To Use:
Transport Protocol retrieves firmware and profiles.
If none is selected, TFTP is assumed and the IP
address of the TFTP server is obtained from the
DHCP server.
Default setting: https
Transport Protocol:
This parameter contains the message that is sent to
the Syslog server at the start of a resync attempt.
Default setting: $PN $MAC -- Requesting resync
$SCHEME://$SERVIP:$PORT$PATH
Log Resync Request Msg:
Syslog message issued upon successful completion
of a resync attempt.
Default setting: $PN $MAC -- Successful resync
$SCHEME://$SERVIP:$PORT$PATH
Log Resync Success Msg:
Cisco ATA 191 and ATA 192 Analog Telephone Adapter Administration Guide for Multiplatform Firmware
51
Voice Settings Configuration
Configuration Profile
To Next Page
Loading...
Need help?
General
