Cisco Catalyst 2950 - Page 653

Index
IN-11
Catalyst 2950 and Catalyst 2955 Switch Software Configuration Guide
78-11380-12
described 2-5
disabling 2-6
recalling commands 2-6
history table, level and number of syslog messages 26-9
hosts, limit on dynamic ports 16-30
HP OpenView 1-10
I
ICMP ping
executing
31-15
overview 31-15
IDS, using with SPAN and RSPAN 24-2
IE2100
CNS embedded agents
described
5-5
enabling automated configuration 5-6
enabling configuration agent 5-9
enabling event agent 5-8
Configuration Registrar
configID, deviceID, hostname
5-3
configuration service 5-2
described 5-1
event service 5-3
described 1-10
support for 1-4
IEEE 802.1D
See STP
IEEE 802.1p
18-1
IEEE 802.1Q
configuration limitations
16-16
native VLAN for untagged traffic 16-20
IEEE 802.1s
See MSTP
IEEE 802.1w
See RSTP
IEEE 802.1x
See port-based authentication
IGMP
configurable leave timer, procedures
20-12
joining multicast group 20-3
join messages 20-3
leave processing, enabling 20-11
leaving multicast group 20-5
queries 20-4
report suppression
described
20-6
disabling 20-12
throttling action 20-23
IGMP, joining multicast group 20-3
IGMP configurable leave timer, described 20-5
IGMP filtering
configuring
20-24
default configuration 20-23
described 20-23
monitoring 20-28
IGMP groups
configuring the throttling action
20-26
setting the maximum number 20-26
IGMP profile
applying
20-25
configuration mode 20-24
configuring 20-24
IGMP snooping
configuring
20-7
default configuration 20-8
definition 20-2
enabling and disabling 20-8
global configuration 20-8
Immediate Leave 20-5
method 20-9
monitoring 20-15
querier
configuring
20-14
guidelines and restrictions 20-6
VLAN configuration 20-9