Cisco CATALYST 2960

Index
IN-14
Catalyst 2960 and 2960-S Switches Software Configuration Guide, Release 15.0(1)SE
OL-26520-01
global leave, IGMP 21-13
guest VLAN and 802.1x 10-22
guide mode 1-2
GUIs
See device manager and Network Assistant
H
hello time
MSTP
17-24
STP 16-22
help, for the command line 2-3
HFTM space 39-26
history
changing the buffer size
2-5
described 2-5
disabling 2-6
recalling commands 2-6
history table, level and number of syslog messages 29-10
host names, in clusters 6-12
hosts, limit on dynamic ports 13-29
HP OpenView 1-5
HQATM space 39-26
HSRP
automatic cluster recovery
6-11
cluster standby group considerations 6-10
See also clusters, cluster standby group, and standby
command switch
HTTP over SSL
see HTTPS
HTTPS
9-46
configuring 9-50
self-signed certificate 9-47
HTTP secure server 9-46
Hulc Forwarding TCAM Manager
See HFTM space
Hulc QoS/ACL TCAM Manager
See HQATM space
I
ICMP
IPv6
35-3
time-exceeded messages 39-17
traceroute and 39-17
unreachable messages and IPv6 37-4
ICMP ping
executing
39-15
overview 39-14
ICMPv6 35-3
IDS appliances
and ingress RSPAN
27-21
and ingress SPAN 27-14
IEEE 802.1D
See STP
IEEE 802.1p
15-1
IEEE 802.1Q
and trunk ports
12-3
configuration limitations 13-15
encapsulation 13-14
native VLAN for untagged traffic 13-19
IEEE 802.1s
See MSTP
IEEE 802.1w
See RSTP
IEEE 802.1x
See port-based authentication
IEEE 802.3ad
See EtherChannel
IEEE 802.3ad, PoE+
1-15, 12-6
IEEE 802.3af
See PoE
IEEE 802.3x flow control
12-29
ifIndex values, SNMP 30-6
IFS 1-6
IGMP
configurable leave timer
described
21-6