Cisco CATALYST 2960

Index
IN-20
Catalyst 2960 and 2960-S Switches Software Configuration Guide, Release 15.0(1)SE
OL-26520-01
DSCP-to-DSCP-mutation 33-67
IP-precedence-to-DSCP 33-64
policed-DSCP 33-65
described 33-11
marking
action with aggregate policers
33-60
described 33-4, 33-9
matching
IPv6 ACLs
37-3
matching, IPv4 ACLs 31-7
maximum aging time
MSTP
17-25
STP 16-23
maximum hop count, MSTP 17-25
maximum number of allowed devices, port-based
authentication
10-38
MDA
configuration guidelines
10-13
described 1-11, 10-12
exceptions with authentication process 10-5
membership mode, VLAN port 13-3
member switch
automatic discovery
6-5
defined 6-2
managing 6-15
passwords 6-12
recovering from lost connectivity 39-12
requirements 6-4
See also candidate switch, cluster standby group, and
standby command switch
memory consistency check errors
example
39-27
memory consistency check routines 1-5, 39-26
memory consistency integrity 1-5, 39-26
messages, to users through banners 5-11
MIBs
overview
30-1
SNMP interaction with 30-5
mirroring traffic for analysis 27-1
mismatches, autonegotiation 39-12
module number 12-16
monitoring
access groups
31-26
cables for unidirectional links 24-1
CDP 25-5
features 1-15
Flex Links 19-14
IGMP
filters
21-29
snooping 21-16, 36-11
interfaces 12-40
IP SLAs operations 32-6
IPv4 ACL configuration 31-26
IPv6 35-11
IPv6 ACL configuration 37-8
MAC address-table move update 19-14
multicast router interfaces 21-17, 36-12
MVR 21-23
network traffic for analysis with probe 27-2
port
blocking
23-20
protection 23-20
SFP status 12-40, 39-14
speed and duplex mode 12-28
traffic flowing among switches 28-1
traffic suppression 23-20
VLANs 13-13
VMPS 13-28
VTP 14-18
mrouter Port 19-3
mrouter port 19-5
MSTP
boundary ports
configuration guidelines
17-15
described 17-6
BPDU filtering
described
18-3
enabling 18-14
BPDU guard