Cisco Catalyst 6500 Series Installation Guide

Chapter 2 Preparing for Installation
Software Requirements
2-26
Catalyst 6500 Series Switch Module Installation Guide
78-15725-02
Figure 2-15 XenPak Optical Transceiver Module
Table 2-16 lists the available XenPak transceiver modules and their
specifications.
Software Requirements
For information on the minimum, recommended, and default software versions
for the Catalyst 6000 series and Catalyst 6500 series switches, supervisor engines,
and modules, refer to the applicable release notes for the latest maintenance
release of your software.
113128
RX
TX
Captive installation screw
Dustplug
Transmit optical bore
Receive optical bore
Table 2-16 XenPak Optical Transceiver Specifications
XenPak Wavelength
Connector and Cable
Type Maximum Distance
XENPAK-10GB-LR 1310 nm SC; SMF 6.2 miles (10 km)
XENPAK-10GB-ER 1550 nm SC; SMF 24.85 miles (40 km)

Cisco Catalyst 6500 Series Specifications

General

Brand	Cisco
Model	Catalyst 6500 Series
Category	Switch
Language	English