• Temperature—Use this tab to view the temperature sensor.
• Voltage—Use this tab to view the voltage sensor.
• Current—Use this tab to view the current sensor.
• LEDs—Use this tab to view the state and color of the LEDs.
On the page, you can view the system event log.System Event Log
There are three tabs on the page:Remote Presence
• Virtual KVM—Use this tab to set vKVM properties.
• Virtual Media—Use this tab to set virtual media properties.
• Serial over LAN—Use this tab to set serial over LAN properties.
There are three areas on this page:BIOS
• Actions—Use this area to configure the server boot order, recover
corrupted BIOS, and clear the BIOS CMOS.
• BIOS Properties—Use this area to view the running version of the
BIOS.
• Boot Order—Use this area to view the configured and actual boot
order.
There are three tabs on the page:User Management
• Local Users—Use this tab to create users.
• Active Directory—Use this tab to set active directory properties.
• Sessions—Use this tab to view current user sessions.
There are two tabs on the page:Network
• Network Settings—Use this tab to set network properties.
• Network Security—Use this tab to set up network security.
There are three areas on this page:Communications Services
• HTTP Properties—Use this area to set HTTP properties.
• SSH Properties—Use this area to set SSH properties.
• IPMI over LAN Properties—Use this area to set IPMI over LAN
properties.
There are two areas on this page:Certificate Management
• Actions—Use this area to generate and upload a certificate.
Cisco UCS C-Series Servers Integrated Management Controller GUI Configuration Guide, Release 1.1(2)
6 OL-22894-01
Overview
Work Pane
To Next Page
Need help?
General
