Cisco UCS C Series - Enabling the Virtual KVM

Procedure
Step 1
In the Navigation pane, click the Server tab.
Step 2
On the Server tab, click Remote Presence.
Step 3
In the Remote Presence pane, click the Virtual KVM tab.
Step 4
On the Virtual KVM tab, uncheck the Enabled check box.
Step 5
Click Save Changes.
Enabling the Virtual KVM
Before You Begin
You must log in as a user with admin privileges to enable the virtual KVM.
Procedure
Step 1
In the Navigation pane, click the Server tab.
Step 2
On the Server tab, click Remote Presence.
Step 3
In the Remote Presence pane, click the Virtual KVM tab.
Step 4
On the Virtual KVM tab, check the Enabled check box.
Step 5
Click Save Changes.
Cisco UCS C-Series Servers Integrated Management Controller GUI Configuration Guide, Release 1.1(2)
34 OL-22894-01
Enabling the Virtual KVM
Configuring the Virtual KVM