Cisco UCS C Series - Managing the Server; Default Chapter; Viewing Overall Server Status

CHAPTER 3
Managing the Server
This chapter includes the following sections:
• Viewing Overall Server Status, page 15
• Toggling the Locator LED, page 17
• Configuring the Server Boot Order, page 17
• Powering On the Server, page 19
• Powering Off the Server, page 19
• Power Cycling the Server, page 19
• Resetting the Server, page 20
• Shutting Down the Server, page 20
Viewing Overall Server Status
Procedure
Step 1
In the Overall Server Status area of the Navigation pane, click the blue health report link to refresh the
Server Summary pane.
Step 2
(Optional) Review the following information in the Server Summary pane:
DescriptionName
The current power state.Power State field
The overall status of the server. This can be:Overall Server Status field
• Memory Test In Progress—The server is performing a self-test
of the installed memory. This condition normally occurs during
the boot process.
• Good
Cisco UCS C-Series Servers Integrated Management Controller GUI Configuration Guide, Release 1.1(2)
OL-22894-01 15