Cisco UCS C Series Configuration Guide

• Current Certificate—Use this area to view the current certificate
for the server.
On this page, you view the CIMC Log.CIMC Log
There are two tabs on the page:Event Management
• Platform Event Filters—Use this tab to set up platform event
filters.
• Trap Settings—Use this tab to set up SNMP traps.
There are four areas on this page:Firmware Management
• Actions—Use this area to install CIMC firmware from a client
browser or TFTP server, or to activate installed CIMC firmware.
• CIMC Firmware—Use this area to view the status of the running,
backup, and boot-loader versions of the firmware.
• Last Firmware Install—Use this area to view information about
the last firmware update.
There are three areas on this page:Utilities
• Actions—Use this area to export technical support data, export or
import the CIMC configuration, reset the CIMC to factory default,
and reboot the CIMC.
• Last Technical Support Data Export—Use this area to view
information about the last technical support data export.
• CIMC Configuration Import/Export—Use this area to view the
action type and its status.
Toolbar
The toolbar displays above the Work pane.
DescriptionElement Name
Refreshes the current page.Refresh
Powers on the server.Power On Server
Powers off the server.Power Off Server
Launches the KVM console.Launch KVM Console
Launches help.Help
Cisco UCS C-Series Servers Integrated Management Controller GUI Configuration Guide, Release 1.1(2)
OL-22894-01 7
Overview
Toolbar

Cisco UCS C Series Specifications

General

Processor	Intel Xeon Scalable Processors
Management	Cisco Integrated Management Controller (CIMC)
Memory	DDR4
Storage	NVMe
RAID Support	Yes
Network	Multiple Gigabit Ethernet and 10 Gigabit Ethernet options
Power Supply	Redundant power supply options
Operating System Support	VMware, Microsoft Windows, Linux
Form Factor	Rack Server