Cisco UCS C Series Configuration Guide

System Event Log
Viewing the System Event Log
Procedure
Step 1
In the Navigation pane, click the Server tab.
Step 2
On the Server tab, click System Event Log.
Step 3
Review the following information for each system event in the log:
DescriptionName
The date and time the event occurred.Timestamp column
The event severity. This can be:Severity column
• Unknown
• Informational
• Normal
• Warning
• Critical
• Non-Recoverable
A description of the event.Description column
Step 4
From the Entries Per Page drop-down list, select the number of system events to display on each page.
Step 5
Click <Newer and Older> to move backward and forward through the pages of system events, or click
<<Newest to move to the top of the list.
By default, the newest system events are displayed at the top if the list.
Clearing the System Event Log
Before You Begin
You must log in as a user with user privileges to clear the system event log.
Cisco UCS C-Series Servers Integrated Management Controller GUI Configuration Guide, Release 1.1(2)
OL-22894-01 67
Viewing the System Event Log
System Event Log

Cisco UCS C Series Specifications

General

Processor	Intel Xeon Scalable Processors
Management	Cisco Integrated Management Controller (CIMC)
Memory	DDR4
Storage	NVMe
RAID Support	Yes
Network	Multiple Gigabit Ethernet and 10 Gigabit Ethernet options
Power Supply	Redundant power supply options
Operating System Support	VMware, Microsoft Windows, Linux
Form Factor	Rack Server