Cisco UCS C Series - Procedure; Resetting the Server; Shutting down the Server; Step 1

Procedure
Step 1
In the Navigation pane, click the Server tab.
Step 2
On the Server tab, click Summary.
Step 3
In the Actions area, click Power Cycle Server.
A dialog box with the message Power Cycle the Server? appears.
Step 4
Click OK.
Resetting the Server
Before You Begin
You must log in with user or admin privileges to perform this task.
Procedure
Step 1
In the Navigation pane, click the Server tab.
Step 2
On the Server tab, click Summary.
Step 3
In the Actions area, click Hard Reset Server.
A dialog box with the message Hard Reset the Server? appears.
Step 4
Click OK.
Shutting Down the Server
Before You Begin
You must log in with user or admin privileges to perform this task.
Procedure
Step 1
In the Navigation pane, click the Server tab.
Step 2
On the Server tab, click Summary.
Step 3
In the Actions area, click Shut Down Server.
A dialog box with the message Shut Down the Server? appears.
Step 4
Click OK.
Cisco UCS C-Series Servers Integrated Management Controller GUI Configuration Guide, Release 1.1(2)
20 OL-22894-01
Managing the Server
Resetting the Server