Cisco UCS C Series Configuration Guide

CHAPTER 6
Managing Remote Presence
This chapter includes the following sections:
• Configuring Serial Over LAN, page 31
• Configuring Virtual Media, page 32
• KVM Console, page 32
• Configuring the Virtual KVM, page 33
Configuring Serial Over LAN
Serial over LAN enables the input and output of the serial port of a managed system to be redirected over IP.
Configure and use serial over LAN on your server when you want to reach the host console with CIMC.
Before You Begin
You must log in as a user with admin privileges to configure serial over LAN.
Procedure
Step 1
In the Navigation pane, click the Server tab.
Step 2
On the Server tab, click Remote Presence.
Step 3
In the Remote Presence pane, click the Serial over LAN tab.
Step 4
In the Serial over LAN Properties area, update the following properties:
DescriptionName
If checked, Serial over LAN is enabled on this server.Enabled check box
The baud rate the system uses for Serial over LAN communication.Baud Rate field
Step 5
Click Save Changes.
Cisco UCS C-Series Servers Integrated Management Controller GUI Configuration Guide, Release 1.1(2)
OL-22894-01 31

Cisco UCS C Series Specifications

General

Processor	Intel Xeon Scalable Processors
Management	Cisco Integrated Management Controller (CIMC)
Memory	DDR4
Storage	NVMe
RAID Support	Yes
Network	Multiple Gigabit Ethernet and 10 Gigabit Ethernet options
Power Supply	Redundant power supply options
Operating System Support	VMware, Microsoft Windows, Linux
Form Factor	Rack Server