Removing the Air Baffle
The server features an air baffle for optimized ventilation. The air baffle is secured by eight (8) M3x L6mm
Phillips screws.
Gather a #2 Phillips head screwdriver before attempting this procedure.
Before you begin
For Recyclers Only! This procedure is not a standard field-service option. This procedure is for recyclers
who will be reclaiming the electronics for proper disposal to comply with local eco design and e-waste
regulations.
Warning
The server features an air baffle for optimized ventilation.
Procedure
Step 1 Using the screwdriver, remove all the screws.
Step 2 Grasp the air baffle and lift it up to remove it from the chassis.
Cisco UCS C885A M8 Server Installation and Service Guide
93
Recycling Server Components
Removing the Air Baffle
To Next Page
Loading...
