Figure 75: Disconnecting the Cable from the Connector
What to do next
Removing the PWR1 and PWR5 Cable, on page 118
Removing the PWR1 and PWR5 Cable
The server has multiple power cables, including a power cable that connects to the BF3 card through the
PWR1 and PWR5 connectors.
Before you begin
For Recyclers Only! This procedure is not a standard field-service option. This procedure is for recyclers
who will be reclaiming the electronics for proper disposal to comply with local eco design and e-waste
regulations.
Warning
Cisco UCS C885A M8 Server Installation and Service Guide
118
Recycling Server Components
Removing the PWR1 and PWR5 Cable
To Next Page
Loading...
